Range Rover Evoque: Land rover tyre repair kit

Land rover tyre repair kit
Land rover tyre repair kit

1. Maximum speed label. 80 km/h (50 mph).
2. Tyre inflation hose.
3. Inflation hose protective cap.
4. Inflation hose connector.
5. Compressor power cable.
6. Power cable connector.
7. Sealant bottle receiver cap (orange).
8. Sealant bottle receiver.
9. Sealant bottle cap.
10. Sealant bottle.
11. Tyre pressure gauge.
12. Compressor on/off switch (I = on, 0 = off).

READ NEXT:

 Using the repair kit

Avoid skin contact with the sealant which contains natural rubber latex. Do not unscrew the sealant bottle from the receiver until it is empty, as sealant will leak out. If the tyre inflation

 Repair procedure

Check the tyre sidewall prior to inflation. If there are any cracks, bumps or similar damage, do not attempt to inflate the tyre. Do not stand directly beside the tyre while the compressor is

 Checking the tyre pressure after a repair

When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the

SEE MORE:

 Shock Absorber and Spring Assembly Vehicles Without: Dynamic Suspension

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle General Equipment Transmission jack Wooden Block Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTE: Some variation in the illustrati

 Rocker Panel

Removal NOTES: The rocker panel is manufactured from mild steel. Some of the butt joints must be MIG brazed due to the location of boron reinforcements. 1. This procedure identifies the method for the replacement of the rocker panel in full. The graphic and table identify possible alternative sec

© 2011-2025 Copyright www.rrevoque.org