Range Rover Evoque: Keyless global closing
To initiate global window closing (if enabled),
touch and hold the lock sensor (1) for 3
seconds. This will also single lock the vehicle
and activate the alarm.
Note: The windows will close only while the
sensor (1) is covered. To fully secure the
vehicle, continue to touch the sensor until all
windows are fully closed.
READ NEXT:
Drive-away locking automatically locks all
doors at a set speed when the vehicle is in
motion. This feature can be enabled/disabled
via Drive-away locking in the Vehicle Settings
menu. See 56, VEH
Valet mode allows the vehicle to be driven, e.g.,
by a parking attendant, but leaves the tailgate
locked and restricts use of the touch screen.
This prevents access to telephone numbers,
navigatio
The interior protection feature of the full alarm
system may be temporarily disabled via Alarm
sensors in the Vehicle Settings menu. See 56,
VEHICLE INFORMATION AND SETTINGS
MENU.
Note: If the in
SEE MORE:
Engine Oil Draining and Filling
Draining
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the engine undershield.
Refer to: Engine Undershield (501-02 Front End Body Panels
Removal
NOTES:
This procedure covers the removal and installation of both rear seat
backrests and the LH rear seat backrest cover.
The RH rear seat backrest cover is similar. All notes and cautions must be
followed strictly to avoid any chance of NVH or
failure of the rear seat backrests.
5-door
© 2011-2025 Copyright www.rrevoque.org
