Range Rover Evoque: Vehicle information and settings menu
Vehicle information and settings menu
A number of vehicle features and display settings may be configured via the vehicle information and settings menu.
To display and navigate through the vehicle information and settings menu, operate the menu control on the steering wheel.
1. Steering wheel menu control.
- Press the up/down arrows to scroll through a list. The current selection will be highlighted.
- Press the right arrow to view a sub list.
- Press the left arrow to return to the previous menu.
- Press the OK button to select the highlighted item.
2. Select to close or return to main menu.
3. Select to view all active warning messages.
4. Select to access the Vehicle Set-up menu.The following features can be personalised:
Before making any changes to
the
vehicle set-up, you must ensure
that you have read and fully
understood the relevant sections
of the handbook. Failure to do so
could lead to serious injury or
death.
- Blind spot monitor.
- Speed warning.
- High beam assist.
- Passenger airbag.
- Alarm sensors.
- Cruise Eco data - Reverse-dip mirrors.
- Easy entry/exit.
- 2-stage locking.
- Audible lock warning - Winter wiper park.
- Drive-away locking.
- Headlamp delay.
5. Select to access the Trip Computer menu.
6. Select to access the Display Settings menu.The following features can be personalised: - Language for message centre display.
- Temperature units.
- Appearance of the instrument panel.
7. Select to access the vehicle Service Menu.
Can be accessed only when the engine is not running.
Note: Some personalisation options may not be available in all markets.
READ NEXT:
Warning and information messages
Do not ignore warning
messages.Take
appropriate action and, when
necessary, seek qualified assistance
before driving the vehicle.
If more than one message is active, each is
displayed in turn
Trip computer
The computer memory stores data for a
journey or series of journeys until it is reset to
zero.
The displayed information is for guidance only,
as it can be affected by traffic, road and
weather c
SEE MORE:
Transmission Vehicles With: M66 6-Speed
Manual Transmission FWD - Installation
Installation
Special Tool(s)
303-021
Engine support bracket
303-662
Support Beam Arm and Hook Assembly, Engine
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. NOTE: This step is only required if previously
removed.
2. NOTE: This step is only
Inner Quarter Panel and Wheelhouse
Removal
NOTES:
The inner quarter panel and wheelhouse is manufactured from mild steel.
The aid of a second technician is required to remove, offer up and align the
inner quarter panel and wheelhouse.
The service panel is not fully welded.
1. In this procedure, to make sure the vehicle is correctl
