Range Rover Evoque: Mud-ruts

This program should be used for

This program should be used for crossing terrain that is muddy, rutted, soft or uneven. HDC is automatically selected with this program.

READ NEXT:

 Sand

This program should be used for terrain which is predominantly soft dry sand or deep gravel. Note: If the vehicle is unable to gain traction in extremely soft, dry sand, switching DSC off may h

 Wading

The maximum advisable wading depth is 500mm (19.7in). If the vehicle remains stationary in water above the door sill level, severe electrical damage may occur. Do not switch off the engine when

 Driver override options

Although Dynamic Stability Control is automatically engaged when a special program is selected, it can be turned off if required. See 91, DISABLING DSC. Hill Descent Control (HDC) will be automat

SEE MORE:

 Tyre pressure monitoring (TPM) system

The TPM system provides a low pressure warning and does not re-inflate your tyres. Tyre pressures should be checked regularly using an accurate pressure gauge when cold. The TPM system can NOT register damage to a tyre. Regularly check the condition of your tyres, especially if the vehicle

 B-Pillar Outer Panel

Removal NOTES: Within this procedure there are 2 different options depending on type of vehicle body. The b-pillar outer panel is manufactured from mild steel. The rocker panel butt joints must be MIG brazed due to the location of boron reinforcements. 1. The B-Pillar outer panel is replaced in

© 2011-2025 Copyright www.rrevoque.org