Range Rover Evoque manuals

Range Rover Evoque: Rear Door Trim Panel

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Interior Trim and Ornamentation / Rear Door Trim Panel

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Torque: 1.3 Nm

Range Rover Evoque. Interior Trim and Ornamentation

2. Torque: 6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

3. Torque: 6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

4.

Range Rover Evoque. Interior Trim and Ornamentation

5.

Range Rover Evoque. Interior Trim and Ornamentation

6.

Range Rover Evoque. Interior Trim and Ornamentation

7. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Interior Trim and Ornamentation

8. Torque: 0.6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

9.

Range Rover Evoque. Interior Trim and Ornamentation

10. Torque: 1 Nm

Range Rover Evoque. Interior Trim and Ornamentation

11.

Range Rover Evoque. Interior Trim and Ornamentation

Installation

1. To install, reverse the removal procedure.

Liftgate Trim Panel

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. NOTE: Make sure the two metal clips are removed from the liftgate.

Range Rover Evoque. Interior Trim and Ornamentation

3. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Interior Trim and Ornamentation

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Headliner

Removal NOTES: Removal steps in this procedure may contain installation details. Vehicles with glass roof panel shown, vehicles without glass roof panel similar. All vehicles 1. Refer to: Windshield

 Engine Cover GTDi 2.0L Petrol, Engine Cover TD4 2.2L Diesel

Engine Cover GTDi 2.0L Petrol Removal NOTE: Removal steps in this procedure may contain installation details. 1. 2. NOTE: Do not disassemble further if the component is removed for access only. Inst

 Loadspace Trim Panel

CAUTION: LH illustration shown, RH is similar. NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. 2. 3. 4. Torque: 1.4 Nm 5. Torque: 20 Nm 6. NOTE: LH side o

SEE MORE:

 Rear Lamp Mounting Panel

Removal NOTES: The rear lamp mounting panel is manufactured from mild steel. The section of the rear lamp mounting panel described within this procedure is for the access for installation of the inner back panel assembly. The upper NVH component must be replaced when a complete panel is installed

 Terrain Response Switchpack (TR)

Terrain Response Control Module (ATCM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle. NOTES: If the

© 2011-2025 Copyright www.rrevoque.org