Range Rover Evoque: Seat belts

cleaning Do not allow any water, cleaning products, or fabric from cloths to enter the seat belt mechanism. Any substance which enters the mechanism may affect the performance of the seat belt in an impact.

Extend the seat belts fully, then use warm water and a non-detergent soap to clean. Allow the seat belts to dry naturally while fully extended.

Note: While cleaning the seat belt, take the opportunity to examine the webbing for damage/wear. Any wear or damage should be reported to, and rectified by your Dealer/Approved Repairer.

READ NEXT:

 Airbag module covers

Airbag covers should only be cleaned using a slightly dampened cloth, and a small amount of upholstery cleaner. Any substance which enters the mechanism can prevent correct deployment of an ai

 Carpet and mats

Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water. For more stubborn stains a commercially available carpet cleaner should be used.

 Instrument panel,touch screen and audio system

Do not use upholstery cleaner on electrical equipment such as fascia switches. When cleaning around electrical equipment such as switches, ensure that fluids do not leak into any gaps around

SEE MORE:

 Torque Converter, Valve Block

TORQUE CONVERTER Torque converter housing Lock-up clutch Turbine Impeller Stator Fluid pump Input shaft The torque converter is the coupling element between the engine and the transmission and is located in the transmission housing, on the engine side of the transmission. The driven power

 To erase all programming

For first time programming, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer HomeLink buttons. Keep the buttons pressed until the indicator lamp begins to flash (this will take approximately 20 second

© 2011-2025 Copyright www.rrevoque.org