Range Rover Evoque: After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.

2. Switch off the ignition and remove the Smart Key from the vehicle.

3. Remove the towing attachment and refit the cover panel to the front bumper.

detaching Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.

READ NEXT:

 After a collision

 Before starting or driving

If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving.

 Event data recording

Event data recorders are capable of collecting and storing short sequences of data during a crash or near-crash event. The recorded information may assist in the investigation of such an event. Th

SEE MORE:

 Battery warning symbols

Do not allow any naked flames, or other sources of ignition near the battery as the battery may emit explosive gasses. Ensure that when working near, or handling the battery, suitable eye protection is worn. This will reduce the risk of eye damage caused by acid splashes. To prevent r

 Clockspring

Removal CAUTION: Make sure that the road wheels are in the straight ahead position. NOTE: Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Refer to: Stee

© 2011-2025 Copyright www.rrevoque.org