Range Rover Evoque: Engine starting: manual transmission

Note: Do not press the accelerator pedal when starting the engine.

1. A valid Smart Key must be inside the vehicle.

2. Fully depress the clutch pedal.

3. Press and release the start button. For diesel engined vehicles there may be a delay while the glow plugs warm up, then the engine will crank automatically until it starts.

READ NEXT:

 If the engine fails to start

Note: If the engine fails to crank when the START/STOP button is pressed and there has been a recent collision, seek qualified assistance. If the engine fails to crank, or fails to start, consult

 Switching off the engine

Before switching off the engine, ensure that the vehicle is parked safely with the park brake applied. 1. Select P for automatic transmission, or neutral for manual transmissions. Note: If any ot

 Switching off the engine with the vehicle moving

It is not advisable to switch off the engine while the vehicle is moving. However, should such a situation arise, then the following procedure applies. - Press and hold the engine START/STOP

SEE MORE:

 Rocker Panel Inner Reinforcement

Removal NOTES: The rocker panel inner reinforcement is manufactured from boron steel. The rocker panel inner reinforcement is unpicked from the side panel reinforcement 'ring-frame', it is not serviced separately. In this procedure the b-pillar reinforcement will be fitted in combination with th

 Anti-Theft - Passive

Anti-Theft - Passive - Component Location COMPONENT LOCATION Instrument cluster Start/stop button Radio Frequency (RF) receiver Interior antennas Keyless Vehicle Module (KVM) Immobilizer Antenna Unit (IAU) Electric steering column lock BJB (battery junction box) Battery CJB (central junc

© 2011-2025 Copyright www.rrevoque.org