Range Rover Evoque: Front seat heaters
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Heating and ventilation / Front seat heaters
Press the relevant button to operate the required seat heater at high level. Three indicators will illuminate.
Press a second time to heat the seat at a medium level. Two indicators will illuminate.
Press a third time to heat the seat at the lowest level. One indicator will illuminate.
Press a fourth time to switch off.
Note: Seat heaters consume a great amount of battery power. They will operate only when the engine is running.
READ NEXT:
Recirculation
- Press briefly to activate timed
recirculation. The button indicator
illuminates when recirculation is on.
- Press and hold the button to activate
latched recirculation. The button indicator
wil
Recirculation with pollution and humidity sensing
- Press the AUTO button briefly to activate
timed recirculation. The AUTO LED will
illuminate. The system automatically
selects fresh and recirculated air
dependent on pollution and cabin
humidit
Water deposits
The climate control system removes moisture
from the air and deposits the excess water
beneath the vehicle. Puddles may form but this
is normal and is no cause for concern.
SEE MORE:
Epb automatic use
EPB will be applied automatically if the ignition
is switched off and the vehicle speed is below
3km/h (2mph).
To prevent automatic operation, when the
vehicle is stationary, press and hold the EPB
switch in the release position. Within 5
seconds, switch off the ignition and continue to
hold
Rear Bumper Mounting
Removal
NOTE: The rear bumper mounting is manufactured from mild steel.
1. In this procedure, to make sure the vehicle is correctly
aligned, it must be placed on an approved alignment
jig.
2. The rear bumper mounting is replaced in conjunction with:
Rear bumper cover
Rear bumper
Back panel
3.
© 2011-2025 Copyright www.rrevoque.org
