Range Rover Evoque: Loading discs
Do not force the disc into
the CD/DVD
loading slot.
Do not use irregular shaped discs or
discs with a scratch protection film or
self-adhesive labels attached.
Dual format, dual-sided discs (DVD
Plus, CD-DVD format) are thicker than
normal discs and consequently
playback cannot be guaranteed, and
jamming may occur.
Blue Ray and other high definition video
format DVD’s will not function in this
player.
DivX Media Format (DMF) is not
supported.
The unit will play compact discs that conform to the international Red Book standard audio specification.
The unit will play Compact Disc Digital Audio (CDDA) discs, MP3, WMA and AAC files. The full infotainment system will also play DVDs.
The unit will play video files recorded in MPEG4 DivX or MPEG4 XVid formats.
The unit will play DivX 3, 4, 5 and 5.2 files.
Version 6 will also play but this depends upon the recording settings.
Acceptable video media recordable discs include; DVD-R, DVD+R, DVD+RW, CD-R, CD+R and CD+RW.
It is recommended that only high quality 12 cm (4.7 in.) circular discs are used.
READ NEXT:
Usb video
The vehicle system will play video files stored
on USB 2.0 devices recorded in MPEG4 DivX 3,
4, 5, 5.2, 6.0 or MPEG4 XVid only.
Licensing
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
registered trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#
Gracenote® end user license agreement
This application or device contains software
from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote
(the “Gracenote Software”) enables this
application t
SEE MORE:
Front Seat Tilt Assembly
Removal
WARNINGS:
To avoid accidental deployment and possible personal injury, the backup
power supply must be depleted before
repairing or replacing any air bag supplemental restraint system (SRS)
components. To deplete the backup power supply
energy, disconnect the battery ground cable and wait
Front Bumper Mounting
Removal
NOTE: The front bumper mounting is manufactured from HSLA300 and mild
steel.
1. In this procedure, to make sure the vehicle is correctly aligned, it must
be placed on
an approved alignment jig.
2. The front bumper mounting is replaced in conjunction with:
Front bumper cover
Front bumper
