Range Rover Evoque: Control Components FWD - Overview
OVERVIEW
The climate control system incorporates the heating, ventilation and A/C (air conditioning) systems. There are 2 main types of climate control system available:
- a dual zone automatic system
- a dual zone automatic system with cool rear face option.
The climate control functions for both systems are controlled by the ATC (automatic temperature control) module. The ATC module is mounted in the center console and contains both the system electronic software and user controls.
The ATC module works in conjunction with a number of other vehicle control modules, including the ECM (engine control module), which controls a number of climate control sub-systems on receipt of requests from the ATC module.
The dual zone climate control system features automatic control of air temperature, air distribution and blower motor speed. The ATC module is also able to control individual temperature requests for both the driver and passenger side of the cabin.
NOTE: The ATC module can only maintain a maximum temperature difference
between the 2 sides of the cabin of up
to approximately 3READ NEXT:
Component Location
COMPONENT LOCATION
Heater assembly
Electric booster heater
Overview
OVERVIEW
Due to the slower warm up times associated with the diesel engine, an
electric booster heater may
Electric Booster Heater - Description and Operation
Component
Location
COMPONENT LOCATION - VEHICLES WITHOUT FFBH REMOTE CONTROL
ATC (automatic temperature control) module
Fuel Fired Booster Heater (FFBH)
Auxiliary coolant pump
Ambient air temper
Fuel Fired Booster Heater AWD
SEE MORE:
For the airbags to operate
correctly
the roof lining and door post trims
must be in good condition, correctly
fitted, and free from obstruction. Any
damage, wear, or incorrect fitment
should be referred to your Dealer/
Authorised Repairer as soon as
possible for examination and repair.
Do
Airbag operation
Moving the nearside headlamp unit to access
bulbs;
1. Remove the two plastic fixings.
2. Pull the tube up to release from the air box.
This will allow more room for
manoeuvrability.
3. Remove the four grille fixings.
4. Remove the two retaining bolts.
5. At the rear of the headlamp unit, p
Headlamps
