Range Rover Evoque manuals

Range Rover Evoque: Lower Arm

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Suspension / Front Suspension / Lower Arm

Removal

CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension.

NOTES:

RH illustration shown, LH is similar.

Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. WARNING: Make sure that a new nut is installed. Torque: 60 Nm

Range Rover Evoque. Front Suspension

4.

Range Rover Evoque. Front Suspension

5. WARNING: Make sure that a new bolt is installed. Torque: 200 Nm

Range Rover Evoque. Front Suspension

6. WARNING: Make sure that a new bolt is installed.

Torque:

Stage 1: 48 Nm
Stage 2: 180

READ NEXT:

 Front Stabilizer Bar AWD

Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTES: Only use clean water as a lubricant for the bushing, if required. Removal steps in this pro

 Front Stabilizer Bar Bushing

Removal NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. WARNING: Make sure

 Wheel Knuckle

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the sus

SEE MORE:

 Emergency brake assist (EBA)

If the driver rapidly applies the brakes, EBA automatically boosts the braking force to its maximum, in order to bring the vehicle to a halt as quickly as possible. If the driver applies the brakes slowly, but conditions mean that ABS operates on the front wheels, EBA will increase the braking

 Fuel Charging and Controls - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION Overview OVERVIEW The 2.0L GTDi engine is equipped with a high-pressure direct injection system controlled by the ECM (engine control module). A high-pressure fuel pump delivers a uniform level of pressure to the shared fuel rail, which serve all 4 fuel injec

© 2011-2025 Copyright www.rrevoque.org