Range Rover Evoque: Timing Chain

Removal

NOTES:

Some illustrations may show the engine removed for clarity.

Some variation in the illustrations may occur, but the essential information is always correct.

1. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

3. Refer to: Timing Cover (303-01B Engine - GTDi 2.0L Petrol, Removal and Installation).

4.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

5.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

6.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

7.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

8. CAUTIONS:

Use an open-ended wrench to hold the camshafts by the hexagon to prevent the camshafts from turning.

Note the fitted position of the component prior to removal. Do not disassemble further if removed for access only

Range Rover Evoque. Engine - GTDi 2.0L Petrol

9.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

Installation

1. CAUTION: Install a new friction washer.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

2. CAUTIONS:

Use an open-ended wrench to hold the camshafts by the hexagon to prevent the camshafts from turning.

Make sure that these components are installed to the noted removal position.

Only tighten the bolts finger-tight at this stage.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

3.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

4. Torque: 10 Nm

Range Rover Evoque. Engine - GTDi 2.0L Petrol

5. Torque: 10 Nm

Range Rover Evoque. Engine - GTDi 2.0L Petrol

6. CAUTION: Use an open-ended wrench to hold the camshafts by the hexagon to prevent the camshafts from turning. Torque: 72 Nm

Range Rover Evoque. Engine - GTDi 2.0L Petrol

7. Refer to: Timing Cover (303-01B Engine - GTDi 2.0L Petrol, Removal and Installation).

8. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

READ NEXT:

 Timing Cover

Special Tool(s) 303-021 Engine support bracket JLR-303-1591 Lifting Bracket, Engine - Rear Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustratio

 Valve Cover

Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this proc

 Engine - Removal and Installation

Removal Special Tool(s) 205-857 Remover, Halfshaft 1. Refer to: Battery Tray (414-01 Battery, Mounting and Cables, Removal and Installation). 2. Refer to: Air Conditioning (A/C) System Recovery, Evacu

SEE MORE:

 Important information

The information contained in this handbook covers all vehicle derivatives and optional equipment, some of which may not be fitted to your vehicle. Due to printing cycles, this handbook may include descriptions of options before they become generally available. The vehicle options, hardware an

 If the engine fails to start

Note: If the engine fails to crank when the START/STOP button is pressed and there has been a recent collision, seek qualified assistance. If the engine fails to crank, or fails to start, consult your Dealer/Authorised Repairer. Diesel engines: If the engine persistently fails to start, make

© 2011-2025 Copyright www.rrevoque.org