Range Rover Evoque: After towing on four wheels
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Vehicle recovery / After towing on four wheels
1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.
2. Switch off the ignition and remove the Smart Key from the vehicle.
3. Remove the towing attachment and refit the cover panel to the front bumper.
Use extreme caution when
detaching
towing equipment. Vehicle movement
is possible which can result in serious
injury.
READ NEXT:
Before starting or driving
If the vehicle is involved in
a collision
it should be checked by a Dealer/
Authorised Repairer, or suitably
qualified persons, before starting or
driving.
Event data recording
Event data recorders are capable of collecting
and storing short sequences of data during a
crash or near-crash event. The recorded
information may assist in the investigation of
such an event. Th
SEE MORE:
Fuel Charging and Controls - Component Location, System Operation and Component Description
Component Location
COMPONENT LOCATION
Overview
OVERVIEW
The 2.0L GTDi engine is equipped with a high-pressure direct injection system
controlled by the ECM (engine control
module). A high-pressure fuel pump delivers a uniform level of pressure to the
shared fuel rail, which serve all 4 fuel
injec
Throttle Body
Removal
NOTES:
Removal steps in this procedure may contain installation details.
Some illustrations may show the engine removed for clarity.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Engine Cover - GTDi 2.0L Petrol (501-05 Interior Tr
© 2011-2026 Copyright www.rrevoque.org - 0.004
