Range Rover Evoque manuals

Range Rover Evoque: Body Repairs - Vehicle Specific Information and Tolerance Checks

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Body Repairs - Vehicle Specific Information and Tolerance Checks

Body and Frame

Front End Body Dimensions

NOTES:

All dimensions shown are in millimetres (mm).

Dimensions shown to holes, are always taken from/to the hole centre. They are also always to the body panel surface, not to the top of bolts or components.

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Side Panel Dimensions

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Rear End Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Under Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Gap and Profile measurements

The following information is to be used as a guide to assist the technician in installing exterior body panels and trim items so as to achieve a correctly aligned and cosmetically acceptable vehicle.

NOTE: All dimensions shown are in millimetres (mm).

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

READ NEXT:

 Front End Sheet Metal Repairs

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment j

 Front Side Member

Removal NOTES: The front side member is manufactured from RP260 and DP600. The front side member long section is cut from the front side member and is manufactured from RP260. The service panel is

SEE MORE:

 Instrument Cluster (IC)

 CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.  NOTES: If the control module or a component

 Folding and raising the rear seats

Folding and raising the rear seats The split fold rear seat of 5 door models can be folded completely, or partially at 60/40 split, to accommodate loads and still retain seating for passengers. To fold part or all of the seat: 1. Fully lower the head restraints. 2. Press either seat backres

© 2011-2025 Copyright www.rrevoque.org