Range Rover Evoque: Diesel glow plug (amber)

Diesel glow plug (amber)
Illuminates when the ignition is
switched on to indicate that the
glow plugs are active. Wait until
the lamp extinguishes before starting the
engine.
READ NEXT:
External temperature (amber)
Illuminates when the external
temperature is low enough that ice
may be present on the road.
Tyre pressure monitoring (yellow)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, one or more tyres are significantly
under-inflated.
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e
SEE MORE:
Removal
WARNINGS:
Make sure the spring compressor Safe Working Load (SWL) meets or exceeds
the spring rating quoted in the
Specifcations section.
Always follow the spring compressor manufacturer's instructions.
The spring is under extreme tension, care must be taken at all times. Failure to
foll
Engine Mount LH
Removal
NOTES:
Removal steps in this procedure may contain installation details.
Some variation in the illustrations may occur, but the essential information is
always correct.
1. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
S
© 2011-2025 Copyright www.rrevoque.org
