Range Rover Evoque manuals

Range Rover Evoque: Direction indicator and side lamp bulbs

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Maintenance / Direction indicator and side lamp bulbs

Removing the nearside bulbs;

To gain more room for accessibility, follow

To gain more room for accessibility, follow steps 1 and 2 for moving the nearside headlamp unit.

1. At the back of the headlamp unit, remove the indicator bulb housing. Turn it counter clockwise to release.

2. To remove the side lamp bulb housing.

Turn it counter clockwise to release.

Removing the offside bulbs;

To gain more room for accessibility, follow the

To gain more room for accessibility, follow the process for moving the offside headlamp unit.

1. At the back of the headlamp unit, remove the indicator bulb housing. Turn it counter clockwise to release.

2. To remove the side lamp bulb housing.

Turn it counter clockwise to release.

READ NEXT:

 Rear lamp bulbs

1. Remove the two fixings. 2. Direction indicator. 3. Reversing lamp Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb i

 Rear fog lamp

Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

 Cleaning the exterior

Remove any heavy deposits of mud and dirt with a hose before washing the vehicle. Never aim a hose water jet directly at the engine air intake, heater air intakes, body seals or at any compone

SEE MORE:

 Front Seat Cushion Cover Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Prior to carrying out the step by step procedure below, Steps 2 and 3 must be followed for knowledge on how to correctly install and care for the seat cover. 2. 3. 4. If required, follow the steps below

 Drive Clutches, Planetary Gear Train

DRIVE CLUTCHES Multiplate Drive or Brake Clutch - Typical Input shaft Main pressure supply port Piston Cylinder - External plate carrier Clutch plate assembly Baffle plate Diaphragm spring Output shaft Bearing Dynamic pressure equalisation chamber Piston chamber Lubrication channel Th

© 2011-2025 Copyright www.rrevoque.org