Range Rover Evoque: Wiper blade replacement

This subject is covered in the Maintenance section. See 175, WIPER BLADE REPLACEMENT.

READ NEXT:

 Windows

 Electric windows and panoramic roof blind

Electric windows and panoramic roof blind 1. Briefly pull a switch fully up and release, the window will continue to rise until fully closed. Briefly press a switch fully down and release, the w

 Window reset

If the battery is disconnected or the power supply is interrupted, the windows must be reset. Once the power supply is restored, reset as follows: 1. Close the window fully. 2. Release the switc

SEE MORE:

 Checking the tyre pressures

Tyre information label location. Tyre pressures should be checked regularly using an accurate pressure gauge, when the tyres are cold. The following procedure should be used to check and adjust the tyres pressures. 1. Remove the valve cap. 2. Firmly attach a tyre pressure gauge/inflator

 Replacement sensor

Should the sensor require replacing, it should be carried out by a Dealer/Authorised Repairer. A replacement sensor must be fitted to a running wheel in order to be recognised by the system. The vehicle needs to be stationary for 15 minutes during the sensor fitment before the system is ready

© 2011-2025 Copyright www.rrevoque.org