Range Rover Evoque: Control Components FWD - Overview

OVERVIEW

The climate control system incorporates the heating, ventilation and A/C (air conditioning) systems. There are 2 main types of climate control system available:

The climate control functions for both systems are controlled by the ATC (automatic temperature control) module. The ATC module is mounted in the center console and contains both the system electronic software and user controls.

The ATC module works in conjunction with a number of other vehicle control modules, including the ECM (engine control module), which controls a number of climate control sub-systems on receipt of requests from the ATC module.

The dual zone climate control system features automatic control of air temperature, air distribution and blower motor speed. The ATC module is also able to control individual temperature requests for both the driver and passenger side of the cabin.

NOTE: The ATC module can only maintain a maximum temperature difference between the 2 sides of the cabin of up to approximately 3

READ NEXT:

 Auxiliary Climate Control

 Electric Booster Heater - Description and Operation

Component Location COMPONENT LOCATION Heater assembly Electric booster heater Overview OVERVIEW Due to the slower warm up times associated with the diesel engine, an electric booster heater may

 Fuel Fired Booster Heater AWD

Component Location COMPONENT LOCATION - VEHICLES WITHOUT FFBH REMOTE CONTROL ATC (automatic temperature control) module Fuel Fired Booster Heater (FFBH) Auxiliary coolant pump Ambient air temper

SEE MORE:

 Differential Rear Bushing

Special Tool(s) 205-860-09 Installer, Differential Bushing 205-861-01 Remover, Differential Bushing 205-861-02 Remover/Installer, Differential Bushing 205-861-03 Installer, Differential Bushing 205-861-04 Installer, Differential Bushing 205-861-05 Installer, Differential Bushing LR-121 Hydraulic Cyl

 Engine System - General Information

Cylinder Head Gasket Selection TD4 2.2L Diesel Special Tool(s) 303-979 Measuring Bridge, Piston Protusion 1. CAUTION: Make sure that the surface is clean and free of foreign material. Zero the gauge on the cylinder block machined face. Special Tool(s): 303-979 2. CAUTION: Make sure that the surfac

© 2011-2025 Copyright www.rrevoque.org