Range Rover Evoque: Decreasing cruise speed

To reduce cruising speed, press and hold control (4). Release the switch when the desired speed is reached, the new speed will be set and maintained.

The set speed can be decreased in steps of 2km/h (1mph), by briefly pressing control (4).

READ NEXT:

 Suspending and resuming cruise control

Suspend cruise control with a single press of control (3). To resume cruise control at the previous set speed, press control (2). RES (2) should be used only if the driver is aware of the set

 Automatic switch off

Cruise control will switch off but the set speed will remain in the memory when: - The CAN button (3) is pressed. - The brake pedal is pressed. - Speed falls below 30km/h (18mph). - Neutral, Park

 Cruise eco data

Diesel only When enabled, a CO2 emission indicator is displayed in the message centre. The higher the numeric reading, the more CO2 is being emitted and the more fuel is being used. See 56, VEH

SEE MORE:

 Generator and Regulator - GTDi 2.0L Petrol

Generator - Component Location COMPONENT LOCATION Battery positive connection LIN (local interconnect network) bus connection Generator Generator - Overview OVERVIEW A single self-exciting generator is located at the front of the engine on the LH (left-hand) side of the cylinder block. There

 Body Closures - Component Location, System Operation and Component Description

Component Location Powered Tailgate - Component Location Tailgate module Powered strut Tailgate open button Tailgate close button Latch assembly Powered cinch motor Powered strut OVERVIEW Tailgate The tailgate is constructed from two lightweight plastic composite parts (inner and outer lo

© 2011-2025 Copyright www.rrevoque.org