Range Rover Evoque: Flat spots due to long term parking

In order to minimise flat spotting, the tyre pressures can be increased to the maximum as stated on the tyre sidewall, for the period when the vehicle is stationary. Tyres must be returned to the specified running pressures before driving.

READ NEXT:

 Age degradation

Tyres degrade over time due to the effects of ultraviolet light, extreme temperatures, high loads, and environmental conditions. It is recommended that tyres are replaced at least every six years,

 Winter tyres

In many countries legislation exists that requires the use of winter tyres during specified periods of the year. M+S tyres have a recognised level of winter performance and need not be replaced.

 Using traction devices

Only use traction devices in heavy snow conditions, on hard road surfaces. Dynamic Stability Control (DSC) must be switched off when using traction devices. Never exceed 50 km/h (30 mph) when

SEE MORE:

  Inner Constant Velocity (CV) Joint Boot

Special Tool(s) 303-D121 Puller, General Purpose General Equipment Vise Removal NOTE: RH inner constant velocity joint boot shown, LH is similar. 1. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation). Refer to: Front Halfshaft RH - LHD AWD/RHD AWD (205-04 Fron

  Front Halfshaft RH FWD

Special Tool(s) 205-857 Remover, Halfshaft Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. Do not allow halfshafts to hang unsupported at one end or joint damage will occur. Make sure the halfshaft constant velocity (CV) joints do not over art

© 2011-2026 Copyright www.rrevoque.org - 0.0068