Range Rover Evoque: Manual seats

Manual seats
Manual seats

the seat while the Do not adjust the seat while the vehicle is moving. Doing so could cause loss of vehicle control and personal injury.

1. Forward and back adjustment.

2. Height adjustment.

3. Backrest adjustment.

4. Head restraint adjustment.

READ NEXT:

 Electric seats

Electric seats 1. Lumbar support adjustment. 2. Backrest adjustment. 3. Head restraint adjustment. 4. Height adjustment. 5. Forward and back adjustment. 6. Cushion angle adjustment. To adjust

 Stalled adjustment

If seat movement stops unexpectedly during adjustment check for any obstructions and remove. Once any obstructions have been removed the seat adjustment mechanism can be reset as follows. Ope

 Sitting in the correct position

The driver and front seat passenger must not ride with the seat fully reclined. Do not adjust the seat while the vehicle is moving. The seat, head restraint, seat belt and airbags, all con

SEE MORE:

 Pairing and connecting a bluetooth® media device

For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION. Using your media device Note: The process of pairing and connecting your media device with the vehicle using the media device, will vary depending on the type of media device. 1. Switch the ign

 Fender Apron Lower Panel

Removal NOTES: The fender apron lower panel is manufactured from mild steel. The panel is serviced less its weld studs This method describes the LH fender apron lower panel, the RH side is similar. 1. The fender apron lower panel is replaced in conjunction with: Front bumper cover Front bumper

© 2011-2025 Copyright www.rrevoque.org