Range Rover Evoque: Trailer levelling

To maintain vehicle stability, it is essential that the trailer is loaded so that it remains parallel to the ground. This is particularly important when towing twin axled trailers.

Vssential towing checks

READ NEXT:

 Trailer electrical connection

Connect only approved electrical circuits, which are in good condition, to the trailer socket. The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness ki

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

SEE MORE:

 B-Pillar Reinforcement

Removal NOTES: The B-Pillar reinforcement is manufactured from boron steel. The B-Pillar reinforcement is unpicked from the side panel reinforcement, 'ring-frame', it is not serviced separately. There are 2 NVH components serviced on the new B-Pillar reinforcement. 1. The B-Pillar reinforcement i

 Keyless Vehicle Module (KVM)

Remote Keyless Entry Module (RFA)  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle.  NOTES: If

© 2011-2025 Copyright www.rrevoque.org