Range Rover Evoque: Using the system

The system is operated using the remote control.

To release the remote from the docked position, press at the top of the remote (1) to unlatch it.

remote Do not attempt to pull the remote control out of its docked position.

Using the appropriate button (6) or (10) or on

Using the appropriate button (6) or (10) or on screen soft key (right or left) to select the required screen, will allow options to be set and selected.

Note: A help screen is available from each screen/menu. To view the help screen for guidance on the available functions and options, touch the question mark (?) icon.

Headphones

READ NEXT:

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

 Voice control

SEE MORE:

 Glass Roof Panel

Removal CAUTIONS: Always protect paintwork and glass when removing exterior components. Always protect the interior components when removing body glass. Measure all gaps between the glass roof panels before prior to removal to help aid installation. Lay the glass on felt covered supports. Do not

 High beam assist

This feature of the Xenon lighting automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. Note: It is not recommended that high

© 2011-2025 Copyright www.rrevoque.org