Range Rover Evoque: After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.

2. Switch off the ignition and remove the Smart Key from the vehicle.

3. Remove the towing attachment and refit the cover panel to the front bumper.

detaching Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.

READ NEXT:

 After a collision

 Before starting or driving

If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving.

 Event data recording

Event data recorders are capable of collecting and storing short sequences of data during a crash or near-crash event. The recorded information may assist in the investigation of such an event. Th

SEE MORE:

 Blower Motor LHD AWD/LHD FWD

Special Tool(s) 412-140 Remover/Installer, Blower Motor Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. NOTE: The recirculation blend door must be closed in order for

 Stop/start (manual transmission only)

The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on. When the engine has been stopped by the stop/start system, the ECO icon will illuminate. When the vehicle comes to a stop, neutral is selected and the

© 2011-2025 Copyright www.rrevoque.org