Range Rover Evoque: Booster cushions

In a situation where a child is too large to fit into a child safety seat but is still too small to safely use just the three point belt, a booster seat is recommended for maximum safety.

Follow the manufacturer's instructions for fitting and use, then adjust the seat belt to suit.

READ NEXT:

 Installing an isofix child seat

Installing an isofix child seat To install an ISOFIX child seat: 1. Locate the ISOFIX locking mechanism. 2. Slide the child seat into the locking mechanism. 3. If an upper tether is fitted to t

 Tether anchorage points (Australia only)

WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, ha

 Attaching tether straps

1. Install the child restraint securely in one of the rear seating positions. 2. Pass the tether strap over the seat back and beneath the head restraint. 3. Attach the tether strap hook to the tet

SEE MORE:

 Starting a disabled vehicle using a starting aid

To start the vehicle using a starting aid or a slave battery, follow the instructions in the sequence given. 1. Connect the positive (Red) booster cable to the positive (+) battery terminal of the discharged battery. 2. Connect the negative (Black) booster cable to the vehicle earth point. 3

 Automatic systems

Gradient Acceleration Control (GAC) and Hill Start Assist are not active while HDC is operating. GAC will limit vehicle acceleration on steep descents, allowing the driver to feel more in control of the vehicle. Hill Start Assist activates when starting a hill ascent from a stationary positio

© 2011-2025 Copyright www.rrevoque.org