Range Rover Evoque: Diesel glow plug (amber)

Diesel glow plug (amber)
Diesel glow plug (amber)

Illuminates when the ignition is switched on to indicate that the glow plugs are active. Wait until the lamp extinguishes before starting the engine.

READ NEXT:

 External temperature (amber)

External temperature (amber) Illuminates when the external temperature is low enough that ice may be present on the road.

 Tyre pressure monitoring (yellow)

Tyre pressure monitoring (yellow) Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, one or more tyres are significantly under-inflated.

 Hill descent control (green)

Hill descent control (green) Illuminates when HDC is selected and HDC operating conditions are met. If the lamp flashes, HDC has been selected, but the operating conditions are not being met (e

SEE MORE:

 Timing Chain

Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. 1. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. WARNING: Make sure to support the vehicle

 Touch Screen (TS)

Touch Screen Display (FCDIM) The table below lists all Diagnostic Trouble Codes (DTCs) that could be logged in the Multifunction Display Module, for additional Diagnosis and Testing information refer to the relevant Diagnosis and Testing Section. For additional information, refer to: Information

© 2011-2025 Copyright www.rrevoque.org