Range Rover Evoque: Exterior mirrors

Exterior mirrors
Exterior mirrors

1. Mirror selector switches. Press to select the left or right mirror.

2. Mirror adjustment switch. Move up/down/left or right to adjust the mirror glass.

3. Press both selector switches together to fold/unfold the mirrors (power fold option).

The mirrors can be adjusted and folded when the ignition is on and for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.

Note: Powerfold will operate only if vehicle speed is below 113km/h (70 mph).

Note: The rear view door mirror heaters operate automatically according to the external temperature and windscreen wiper operation.

Note: An amount of knock protection is designed into the door mirrors. If a mirror is accidentally knocked inwards or manually folded inwards, the mirror head will be disengaged from the folding mechanism. To re-engage the mechanism, fold then unfold the mirror using the switch.

Note: A thermal cut-out which will temporarily disable the powerfold feature if the switches are operated repeatedly.

READ NEXT:

 Automatic powerfold mirrors

Powerfold mirrors can be configured to automatically fold when the vehicle is locked and unfold when unlocked. This function can be enabled/disabled by your Dealer/Authorised Repairer. Note: If

 Mirror dip when reversing

If the vehicle is equipped with memory seats, when reverse gear is selected the door mirrors can be set to automatically adjust, providing an improved viewing angle of the curb side for reversing.

 Interior mirror

Auto dimming mirror 1. Ambient light sensor. 2. High beam assist sensor. Interior mirror dimming will adjust automatically according to the amount of ambient light when the ignition is on. If r

SEE MORE:

 A-Pillar Outer Panel

Removal NOTES: The A-pillar outer panel is manufactured from mild steel. The fender mounting bracket is serviced on the new panel. The upper and lower butt joint must be MIG brazed due to the location of a boron reinforcement. A new anti tamper VIN indentification decal will be required when rep

 Transmission Fluid Pan GTDi 2.0L Petrol

Removal CAUTION: Extreme cleanliness must be exercised when handling this component. NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Refer to: Eng

© 2011-2025 Copyright www.rrevoque.org