Range Rover Evoque: Playing a portable device

If you are using a USB mass storage device or approved iPod, you can control playback using the touch screen controls.

If you are using a Bluetooth® device, you can control playback using the touch screen, but some controls are unavailable.

If you are using any portable media device via the AUX socket, then you must control playback from the device itself.

recommend the Land Rover does not recommend the use of a Hard Disc Drive via the USB link while the vehicle is in motion. These devices are not designed for in car use and may be damaged.

READ NEXT:

 Connecting a device

Connecting a device 1. USB/iPod sockets. 2. 3.5 mm AUX socket. 3. Rear media USB/iPod socket. 4. Rear media AV sockets. Connect the device into the appropriate socket. Note: Use the cable supp

 Aux input socket

The 3.5mm AUX socket allows additional equipment (e.g. personal stereos MP3 player, hand-held navigation unit, etc.) to be connected to the audio system. The auxiliary power socket, situated next

 Pairing and connecting a bluetooth® media device

For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION. Using your media device Note: The process of pairing and connecting your media device with the v

SEE MORE:

  Exterior Lighting - Component Location

COMPONENT LOCATION Instrument cluster Hazard flasher switch Rain/Light sensor Rear height sensor (Xenon headlamps only) Side turn signal indicator lamp Headlamp leveling control module CJB (central junction box) Reverse lamp switch Front height sensor (Xenon headlamps only) Stop lamp swi

  Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High speed CAN (controller area network) bus; O = LIN (local interconnect network) bus Battery BJB (battery junction box) Front height sensor Rear height sensor Headlamp leveling control module Front right fog lamp Front left fog lamp Left side rep

© 2011-2026 Copyright www.rrevoque.org - 0.0048