Range Rover Evoque: Rolling re-start

If the engine is switched off while the vehicle is moving, a rolling re-start can be initiated.

Automatic transmission - select neutral (N) and then press the engine START/STOP button.

When the engine re-starts, select transmission position D.

Manual transmission - depress the clutch and then press the engine START/STOP button.

When the engine re-starts, select an appropriate forward gear.

READ NEXT:

 Keyless start backup

If the vehicle has been unlocked using the emergency key blade or the Smart Key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start t

 Stop/start (manual transmission only)

The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on. When the engine has been stopped by the stop/start syst

 Conditions preventing automatic engine stop

The engine will not automatically stop if:<> - the external temperature is below approximately 0°C (32°F) - the external temperature is above approximately40°C (104°F) - engine has not re

SEE MORE:

 Pairing and connecting a bluetooth® media device

For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION. Using your media device Note: The process of pairing and connecting your media device with the vehicle using the media device, will vary depending on the type of media device. 1. Switch the ign

 Block Heater

Removal 1. Refer to: Cooling System Partial Draining, Filling and Bleeding (303-03B Engine Cooling - GTDi 2.0L Petrol, General Procedures). 2. Refer to: Engine Undershield (501-02 Front End Body Panels, Removal and Installation). 3. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installat

© 2011-2025 Copyright www.rrevoque.org