Range Rover Evoque: Eco active (green)

Eco active (green)
Eco active (green)

Illuminates when the Stop/Start system is activated. The engine will automatically switch off when the vehicle comes to a stop, neutral is selected and the clutch is fully released.

READ NEXT:

 Heating and ventilation

 Heating and ventilation controls

Controls 1. Temperature controls. For individual driver/passenger settings. 2. Maximum defrost program. 3. Air distribution. Note: More than one setting may be selected at a time to achieve th

 Auto mode

AUTO mode should be used as the normal operating mode. The air conditioning, heating and ventilation controls automatically provide an optimum environment at the selected temperature. To resume f

SEE MORE:

 Instrument Panel GTDi 2.0L Petrol

Removal NOTE: Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and

 To erase all programming

For first time programming, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer HomeLink buttons. Keep the buttons pressed until the indicator lamp begins to flash (this will take approximately 20 second

© 2011-2025 Copyright www.rrevoque.org