Range Rover Evoque: Steering Column Switches

Torque Specifications

Steering Column Multifunction Switch

Removal

NOTES:

Removal steps in this procedure may contain installation details.

Removal of the windshield wiper switch assembly is identical to this procedure.

1.

2.

3.

4.

5.

Installation

1. To install, reverse the removal procedure.

Ignition Switch

Removal

NOTE: Removal steps in this procedure may contain installation details.

1.

2.

3. CAUTION: LH illustration shown, RH is similar.

NOTE: The step must be carried out on both sides.

4.

5. Torque: 6 Nm

6.

7. Torque: 1.5 Nm

8.

Installation

1. To install, reverse the removal procedure.

Steering Column Lock Module

Removal

NOTES:

Removal steps in this procedure may contain installation details.

The steering column lock module is retained with 2 patch locked, tamper proof bolts.

1. Refer to: Steering Column (211-04 Steering Column, Removal and Installation).

2. Using a suitable stud extraction tool, remove the tamper proof bolts.

Installation

1. CAUTION: Tighten the new tamper proof bolts until the hexagon shears. To install, reverse the removal procedure.

2. Using the Land Rover approved diagnostic system, calibrate a new module.

3. If a new component is installed, the soft lock stop reset routine should be completed on the power steering system, using the approved diagnostic tool.

READ NEXT: