Range Rover Evoque: Changing the smart key batttery
When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message centre.
To renew the battery: 1. Slide open the side cover.
2. Remove the emergency key and fit into the receiver.
3. With the key unfolded, twist it to split the Smart Key case open.
4. Remove the old battery and fit a new CR2032 type battery (available from your Dealer), with the positive (+) side upwards.
Note: Avoid touching the new battery, as moisture/oil from fingers can reduce battery life and corrode the contacts.
Refit the parts in reverse order, ensuring that they click securely into place.
Battery disposal: Used batteries must be disposed of correctly, as they contain harmful substances.
Seek advice on disposal from your Dealer and/or your local authority.
READ NEXT:
Locking and arming the alarm
CAUTION: No modifications or
additions should be made to the
anti-theft system. Such changes could
cause the system to malfunction.
There are two levels of security:
- Single locking. With all d
Lock confirmation
If you are uncertain whether the vehicle is
locked and armed (either by single or double
locking), press either the Smart Key lock
button or, if Keyless entry is fitted, touch an
exterior door han
SEE MORE:
Using wheel chocks
Note: Wheel chocks are not supplied as part of
the tool kit.
Wheel chocks are a useful addition to a vehicle
tool kit. Note the following advice when using
wheel chocks.
Before raising the vehicle,
the wheel
diagonally opposite the one to be
removed must be chocked.
Always chock the wheel
Dual view selection
When the ignition is switched on or the audio
unit is turned on after being turned off, single
view mode will be the default view.
To select dual view, press the dual view hard
key on the fascia surround. See 111,
AUDIO/VIDEO CONTROLS.
Press again to display the dual view Options
menu. From h
