Range Rover Evoque: Inner Constant Velocity (CV) Joint Boot

Special Tool(s)

303-D121
Puller, General Purpose

General Equipment

• Vise

Removal

NOTE: RH inner constant velocity joint boot shown, LH is similar.

1. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).

Refer to: Front Halfshaft RH - LHD AWD/RHD AWD (205-04 Front Drive Halfshafts, Removal and Installation).

Refer to: Front Halfshaft RH - FWD (205-04 Front Drive Halfshafts, Removal and Installation).

2. NOTE: Discard the retaining clips. General Equipment: Vise

3. CAUTION: Make sure that filings and swarf do not enter the component.

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

4. NOTE: Discard the retaining clip.

5. Special Tool(s): 303-D121

Installation

1. CAUTION: Extreme cleanliness must be exercised when handling these components. Clean and inspect the components for deterioration.

2.

3. NOTE: Install a new retaining clip.

4. CAUTION: Make sure that these components are installed to the noted removal position.

5. Pack the inner CV joint with the grease supplied.

6. NOTE: Install new retaining clips.

7. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).

Refer to: Front Halfshaft RH - LHD AWD/RHD AWD (205-04 Front Drive Halfshafts, Removal and Installation).

Refer to: Front Halfshaft RH - FWD (205-04 Front Drive Halfshafts, Removal and Installation).

Outer Constant Velocity (CV) Joint Boot

General Equipment

• Vise

Removal

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Inner Constant Velocity (CV) Joint Boot (205-04 Front Drive Halfshafts, Removal and Installation).

3. NOTE: Discard the retaining clips. General Equipment: Vise

Installation

1. CAUTION: Extreme cleanliness must be exercised when handling these components. Clean and inspect the components for deterioration.

2. Pack the outer CV joint with the grease supplied.

3. NOTES:

Install new retaining clips.

Some variation in the illustrations may occur, but the essential information is always correct.

4. Refer to: Inner Constant Velocity (CV) Joint Boot (205-04 Front Drive Halfshafts, Removal and Installation).

READ NEXT: