Range Rover Evoque: Reverse gear
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Gearbox / Reverse gear
Never select Reverse (R) when
the
vehicle is in forward motion.
Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied.
Rotate to R.
READ NEXT:
Neutral
Disconnects drive to the wheels. Use the
parking brake while N is selected.
Do not use for vehicle recovery purposes.
Drive
Never select a forward gear
when the
vehicle is in rearward motion.
Gear changing is fully automatic. Shift points
are determined by accelerator pedal position
and current road speed.
Sport mode
The transmission will stay in the lower gears
for longer, improving mid-range performance.
To deselect Sport mode, move the selector
back to D.
SEE MORE:
Front Side Member Section
Removal
NOTES:
The front side member is manufactured from RP260 and DP600.
The front side member section is cut from the front side member and is
manufactured from RP260.
This procedure is written for the LH front side member section replacement, the
LH and RH front side member sections differ i
Fender Apron Panel Reinforcement
Removal
NOTE: The fender apron panel reinforcement is manufactured from mild
steel.
1.
2. For additional information relating to this repair procedure please see
the
following:
For additional information, refer to: Health and Safety Precautions (100-00
General Information, Description and Operat
© 2011-2026 Copyright www.rrevoque.org - 0.0055
