Range Rover Evoque: Telephone system controls
Telephone system controls
1. Change phone. Touch to search new or change to another paired phone.
2. Last 10. Select to access the last 10 dialled, received and missed calls.
3. Phonebook. Select to access the downloaded phonebook.
4. Digit Dial. Select to access Digit Dial mode.
5. Touch and hold soft key 1 to retrieve your Voice mail.
6. Status display. Displays the name and/or number dialled and call duration.
7. Call Connect/Disconnect icons. Touch to send/accept or end/reject a call.
8. Settings. Select to access; Voice mail, Answer options and Phone options.
9. Mute microphone. Select to initiate Privacy mode. While selected, the caller will not hear you talking.
10. Touch to activate/deactivate Auto reject.
When active, any incoming calls will be rejected or diverted to voice mail (depending on mobile phone settings).
11. Use handset. Select to switch the call to your mobile phone.
12. Delete. Touch and release to delete the last entered digit. Touch and hold to delete the whole entered number.
READ NEXT:
Pairing and connecting from your mobile phone
Note: The process of pairing and connecting
your phone with the vehicle using the mobile
phone, will vary depending on the type of
mobile phone used.
1. Switch the ignition on and ensure that the
Pairing and connecting from the touch screen
1. Switch on your mobile phone’s Bluetooth®
connection. Make sure that your mobile
phone is in Bluetooth® discoverable mode,
sometimes referred to as find me mode
(see your phone’s operating
Changing the connected phone
Up to 10 mobile phones can be paired with the
vehicle in the same way. However, only one can
be connected and ready for use as a phone at
any one time.
To connect a different paired phone, follow
SEE MORE:
Manual Transmission FWD
Component
Location
COMPONENT LOCATION
Manual transmission
Selector lever assembly
Overview
OVERVIEW
The M66EH50 manual transmission is a 6 speed unit manufactured by Getrag-Ford
in Cologne, Germany. The transmission
is a highly compact 4 shaft design, incorporating the front final drive gear.
Inner Quarter Panel
Removal
NOTES:
The inner quarter panel is manufactured from mild steel.
There are NVH components on this panel, they are not serviced on the new panel.
If damaged, new components will be required.
1. The front inner quarter panel is replaced in conjunction with:
Rear bumper cover
Quarter panel
