Range Rover Evoque: Underbody maintenance

Regularly flush the underbody with plain water, and pay particular attention to areas where mud and debris collect.

If damage or corrosion are detected, have the vehicle checked by your Dealer/Authorised Repairer as soon as possible.

READ NEXT:

 Cleaning after off-road driving

Ensure that the areas around air intakes and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the engine t

 Glass surfaces

Clean the rear window with a soft cloth to avoid damaging the heating element. Do not scrape the glass or use any abrasive cleaning fluid. Mirror glass is particularly susceptible to damage. Wash

 Cleaning the rear screen

To avoid damaging the heating elements when cleaning the inside of the rear screen, use only a soft damp cloth or chamois leather. Do not use solvents or sharp objects to clean the glass.

SEE MORE:

 Engine Emission Control - GTDi 2.0L Petrol

Emission Control - Component Location COMPONENT LOCATION Intake manifold Bolt (8 off) Crankcase ventilation hose Oil separator Gasket Camshaft cover Lower clean air inlet duct Upper clean air inlet duct Camshaft cover vent hose Air cleaner housing Engine Emission Control - Overview OVER

 Rear Bumper Mounting

Removal NOTE: The rear bumper mounting is manufactured from mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The rear bumper mounting is replaced in conjunction with: Rear bumper cover Rear bumper Back panel 3.

© 2011-2025 Copyright www.rrevoque.org