Range Rover Evoque: Booster cushions

In a situation where a child is too large to fit into a child safety seat but is still too small to safely use just the three point belt, a booster seat is recommended for maximum safety.

Follow the manufacturer's instructions for fitting and use, then adjust the seat belt to suit.

READ NEXT:

 Installing an isofix child seat

Installing an isofix child seat To install an ISOFIX child seat: 1. Locate the ISOFIX locking mechanism. 2. Slide the child seat into the locking mechanism. 3. If an upper tether is fitted to t

 Tether anchorage points (Australia only)

WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, ha

 Attaching tether straps

1. Install the child restraint securely in one of the rear seating positions. 2. Pass the tether strap over the seat back and beneath the head restraint. 3. Attach the tether strap hook to the tet

SEE MORE:

 Transmission Draining and Filling

WARNING: Observe due care when draining, as the fluid can be very hot. 1. WARNING: Make sure to support the vehicle with axle stands. NOTE: Make sure that the vehicle is standing on a level surface. Raise and support the vehicle. 2. Refer to: Engine Undershield (501-02 Front End Body Panels, Remo

 Accessory Drive - GTDi 2.0L Petrol

Torque Specifications Accessory Drive Belt Removal NOTE: Some illustrations may show the engine removed for clarity. 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. WARNING: Make sure to support the vehicle with axle stand

© 2011-2025 Copyright www.rrevoque.org