Range Rover Evoque: Drive
Never select a forward gear
when the
vehicle is in rearward motion.
Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.
READ NEXT:
Sport mode
The transmission will stay in the lower gears
for longer, improving mid-range performance.
To deselect Sport mode, move the selector
back to D.
Commandshift™
To return to Sport mode after CommandShift
has been selected, move the selector back to D
then back to Sport mode. Transmission
Commandshift Selected will appear in the
message centre when the tra
Kick-down
Push the accelerator pedal fully down to
achieve rapid acceleration in automatic mode.
When the pedal is relaxed, normal gear
changing will resume.
SEE MORE:
Front Side Member Section
Removal
NOTES:
The front side member is manufactured from RP260 and DP600.
The front side member section is cut from the front side member and is
manufactured from RP260.
This procedure is written for the LH front side member section replacement, the
LH and RH front side member sections differ i
Removing the temporary spare wheel
Remove the spare wheel prior
to
jacking the vehicle, to avoid
destabilising the vehicle when raised.
Do not use power tools to
loosen the
spare wheel. Doing so may damage the
mechanism.
1. To access the temporary spare wheel, fold
forward the rear edge of the cover then
remove it.
2.
© 2011-2025 Copyright www.rrevoque.org
