Range Rover Evoque: Screen modes
Touch the screen mode selection button (12) to view a series of icons, each depicting a different screen mode (as detailed below).
Touch the relevant icon to select the desired screen mode.
Full screen view.
Split screen view. A more detailed view of the local area and road system is displayed on the right.
Shows the next junction in the right half screen.
This view is only available when travelling on a motorway. It displays automatically to show remaining exits along your route.
Shows list of forthcoming junctions and turn directions on the right half screen.
READ NEXT:
Search area
The navigation map database is divided into
countries, or geographically defined areas
within countries, called search areas. When
setting a route, the destination (or waypoint)
entered must be in
Setting a destination
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
SEE MORE:
Lifting
Two-Post Lift
WARNING:
Make sure that the vehicle is stable before commencing work.
CAUTION: If
the drive shaft(s) are to be removed, release the parking brake and select
NEUTRAL 'N' in the
transmission in order that the shaft(s) can be rotated when the vehicle is
raised to the desired height.
System fault
If a fault with one of the radar sensors is
detected, an amber warning indicator dot is
displayed in the exterior mirror and the
message BSM not available is displayed in the
message centre.
Note: Even if the detected fault only affects the
radar sensor on one side of the vehicle, the
whole s
© 2011-2025 Copyright www.rrevoque.org
