Range Rover Evoque: Overhead Console

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. CAUTION: Take extra care not to damage the edges of the component.

Range Rover Evoque. Instrument Panel and Console

2.

Range Rover Evoque. Instrument Panel and Console

3. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Instrument Panel and Console

4. CAUTION: Take extra care not to damage the wiring harnesses.

Take precautions to avoid any electrostatic charging, which could damage this comopnent.

Range Rover Evoque. Instrument Panel and Console

5.

Range Rover Evoque. Instrument Panel and Console

6. CAUTION: Take extra care not to damage the wiring harnesses.

Range Rover Evoque. Instrument Panel and Console

7.

Range Rover Evoque. Instrument Panel and Console

8.

Range Rover Evoque. Instrument Panel and Console

Installation

1. CAUTION: Take extra care not to damage the wiring harnesses.

NOTE: If installing a new overhead console, make sure the original blanking plugs are installed to the new component.

To install, reverse the removal procedure.

Range Rover Evoque. Instrument Panel and Console

Glove Compartment

Removal

NOTE: Removal steps in this procedure may contain installation details.

1.

Range Rover Evoque. Instrument Panel and Console

2.

Range Rover Evoque. Instrument Panel and Console

3.

Range Rover Evoque. Instrument Panel and Console

4. NOTES:

Left-hand shown, right-hand similar.

The step must be carried out on both sides.

Range Rover Evoque. Instrument Panel and Console

5.

Range Rover Evoque. Instrument Panel and Console

6. Torque: 4 Nm

Range Rover Evoque. Instrument Panel and Console

7.

Range Rover Evoque. Instrument Panel and Console

8.

Range Rover Evoque. Instrument Panel and Console

9. NOTE: Glove compartment shown removed for clarity.

Range Rover Evoque. Instrument Panel and Console

10. Torque: 6 Nm

Range Rover Evoque. Instrument Panel and Console

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Floor Console Upper Section

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. CAUTION: The procedure must be carried out on both sides. NOTE: LH illustration shown, RH is similar. T

 Handles, Locks, Latches and Entry Systems

 Locks, Latches and Entry Systems

Principle of Operation For a detailed description of the locks, latches and entry systems and operation, refer to the relevant Description and Operation section of the workshop manual REFER to: Handl

SEE MORE:

 Luggage Compartment Powered Lid Module

Luggage Compartment Powered Lid Module (RGTM)  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle &nbs

 Information and assistance

It is recommended that when you sell or dispose of the vehicle, the programmed HomeLink buttons be erased for security purposes. For information on the range of available compatible products or accessories, or for assistance, you should contact your Dealer/ Authorised Repairer. You can als

© 2011-2025 Copyright www.rrevoque.org