Range Rover Evoque: Deselecting valet mode

If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.

Enter your four digit PIN and touch the OK button.

Valet mode is deactivated is displayed.

- The tailgate will return to the previously set security requirement.

- All touch screen functions are enabled.

See 14, SELECTING VALET MODE.

Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.

READ NEXT:

 Operating the tailgate

Ensure there is minimum space of 1.0M (39 in) above the rear of vehicle before operating the tailgate. Insufficient space may result in damage to the vehicle. Do not operate the tailgate if

 Powered tailgate operation

1. Press to open the powered tailgate. 2. Press and release to close the powered tailgate. After the tailgate has opened to its set height, it can be manually raised or lowered. If the tailgate

 Powered tailgate opening height

The maximum opening height can be set as required. This is useful in parking areas with low ceiling heights or just for ease of use. 1. Open the tailgate to the position which you want to set as t

SEE MORE:

 Fuse box locations

Fuse box locations When a fuse box lid is removed, take care to protect the box from moisture, and refit the lid at the earliest opportunity. Engine compartment - fuse box access: 1. Remove the two plastic fixings. 2. Pull the tube up to release from the air box. 3. Delatch the tabs. Th

 Blower Motor LHD AWD/LHD FWD

Special Tool(s) 412-140 Remover/Installer, Blower Motor Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. NOTE: The recirculation blend door must be closed in order for

© 2011-2025 Copyright www.rrevoque.org