Range Rover Evoque: Disabling stop/start

Disabling stop/start
Disabling stop/start

To switch the system off (preventing automatic stop/start) press the ECO switch. The LED indicator will extinguish to confirm that the system is off.

Note: The engine will restart automatically If the switch is pressed to disable the system, while an automatic engine stop is in progress.

If the LED indicator fails to illuminate at start up, a system fault may be present. Contact your Land Rover dealer for assistance.

READ NEXT:

 Eco stall recovery

In the event that the engine stalls, it can be restarted by fully depressing the clutch pedal. Note: Automatic stall restart will only operate once. If the engine is stalled a second time the engi

 Emission control system

Land Rover vehicles are fitted with emission and evaporative control systems. In many countries it is unlawful to tamper, modify or replace such equipment and legal penalties apply if the laws are

 Diesel particulate filter (DPF)

Diesel vehicles equipped with a particulate filter have more efficient emission control. The particles in the exhaust gases are collected in the filter during normal driving. When a DPF message is

SEE MORE:

 Shock Absorber and Spring Assembly Vehicles Without: Dynamic Suspension

Special Tool(s) JLR-204-804 Lever, Wheel Knuckle General Equipment Transmission jack Wooden Block CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. LH illustration shown, RH is similar. NOTES: Removal steps in this procedure may contain installation d

 Checking the tyre pressures

Tyre information label location. Tyre pressures should be checked regularly using an accurate pressure gauge, when the tyres are cold. The following procedure should be used to check and adjust the tyres pressures. 1. Remove the valve cap. 2. Firmly attach a tyre pressure gauge/inflator

© 2011-2025 Copyright www.rrevoque.org