Range Rover Evoque: Front seat heaters
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Heating and ventilation / Front seat heaters
Press the relevant button to operate the required seat heater at high level. Three indicators will illuminate.
Press a second time to heat the seat at a medium level. Two indicators will illuminate.
Press a third time to heat the seat at the lowest level. One indicator will illuminate.
Press a fourth time to switch off.
Note: Seat heaters consume a great amount of battery power. They will operate only when the engine is running.
READ NEXT:
Recirculation
- Press briefly to activate timed
recirculation. The button indicator
illuminates when recirculation is on.
- Press and hold the button to activate
latched recirculation. The button indicator
wil
Recirculation with pollution and humidity sensing
- Press the AUTO button briefly to activate
timed recirculation. The AUTO LED will
illuminate. The system automatically
selects fresh and recirculated air
dependent on pollution and cabin
humidit
Water deposits
The climate control system removes moisture
from the air and deposits the excess water
beneath the vehicle. Puddles may form but this
is normal and is no cause for concern.
SEE MORE:
Desiccant Bag GTDi 2.0L Petrol
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Condenser - GTDi 2.0L Petrol (412-01 Climate Control,
Removal and Installation).
3. Torque: 11 Nm
Installation
1
Body Repairs - Corrosion Protection
Corrosion Protection
Galvanic Corrosion
Galvanic corrosion is the cross-contamination of dissimilar metals, in this
case aluminium and steel. Avoidance of galvanic
corrosion is an important issue to be considered in the repair of aluminium
bodied vehicles.
Precautions to prevent the contamination
© 2011-2025 Copyright www.rrevoque.org
