Range Rover Evoque: Head restraints
Adjust the head restraint so
that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
event of a collision.
Do not drive, or carry passengers with
the head restraints removed from
occupied seats. The absence of a
correctly adjusted head restraint
increases the risk of neck injury in the
event of a collision.
Never adjust the head restraints while
the vehicle is in motion.
Always store a removed head restraint
securely.
1. Move the head restraint up or down to the required position.
2. Press the locking collar to adjust the restraint downwards.
Manual head restraints can be removed, if required. Raise the head restraint to its uppermost position and press the locking collar (3). Lift the restraint out of the seatback.
Note: Head restraints fitted with Rear seat entertainment screens must NOT be removed.
Ensure the head restraint is refitted before the seat is used by a passenger.
To refit the head restraint, ensure it is facing the correct direction, insert the stems of the head restraint into the sockets and push it downwards until at least the first click.
READ NEXT:
Integrated head restraints
Models with ‘sports’ seats have non adjustable
and non removable head restraints.
Rear seat access (coupe models)
The front seats tilt and power slide forwards for
entry to and exit from the rear seats. Operation
is controlled by a lever and switch.
1. Lift the locking lever and pivot the seatback
forwards.
SEE MORE:
Rear View
Camera (RVC)
Image Processing Module B
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution
of control modules does
not guarantee confirmation of a fault, and may also cause additional faults in
the vehicle being tested and/or the donor
vehicle.
NOTES:
If the con
Fender Apron Panel Reinforcement
Removal
NOTE: The fender apron panel reinforcement is manufactured from mild
steel.
1.
2. For additional information relating to this repair procedure please see
the
following:
For additional information, refer to: Health and Safety Precautions (100-00
General Information, Description and Operat
