Range Rover Evoque: Touch screen remote control

Touch screen remote control
Touch screen remote control

1. Press here to undock remote control.

screen to Do not press the touch screen to undock the remote control.

2. Touch screen.

3. Home screen.

4. Video source select.

5. Audio source select.

6. Right screen select.

7. Right screen tell-tale. (illuminates when right screen has been selected).

8. Cursor movement and option select buttons.

9. Left screen tell-tale. (illuminates when left screen has been selected).

10. Left screen select.

11. Screen brightness - decrease.

12. Screen brightness - increase.

13. RSE settings.

READ NEXT:

 Using the system

The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

SEE MORE:

 Checking the tyre pressure after a repair

When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the vehicle. Visually examine the tyre, and check its pressure. If there are any signs of damage or

 Sensor blockage

If one of the sensors is completely obscured the BSM system is automatically disabled, the warning indicator dot is displayed in the exterior mirror and the message BSM sensor blocked appears in the message centre. Note: Blockage testing is only initiated when vehicle speed is above 32km/h (20

© 2011-2025 Copyright www.rrevoque.org