Range Rover Evoque: Search area
The navigation map database is divided into countries, or geographically defined areas within countries, called search areas. When setting a route, the destination (or waypoint) entered must be in the currently selected search area.
Before attempting to set a destination or waypoint, set the correct search area as follows: - Select Destination entry from the main navigation menu.
- Select page 2 of Destination entry then select Search area.
- Scroll through the list and select the 3 letter code that corresponds to the desired destination area.
- Select OK. The destination entry menu is shown and the information window shows the currently selected search area.
READ NEXT:
Setting a destination
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
SEE MORE:
Wheel changing safety
Before raising the vehicle or changing a wheel,
ensure that you read and comply with the
following warnings.
Always find a safe place to
stop, off
the highway and away from traffic.
Ensure that the vehicle and jack are
both on firm level ground.
Apply the parking brake. Engage Park
(P) on
Terrain Response Switchpack (TR)
Terrain Response Control Module (ATCM)
CAUTION: Diagnosis
by substitution from a donor vehicle is NOT acceptable. Substitution of control
modules does
not guarantee confirmation of a fault, and may also cause additional faults in
the vehicle being tested and/or the donor
vehicle.
NOTES:
If the
© 2011-2025 Copyright www.rrevoque.org
