Range Rover Evoque: Vehicle position error

Under certain conditions it is possible for the vehicle position shown on screen to be incorrect. This may happen when: - Driving on a spiral ramp in a building.

- Driving on or beneath elevated roads.

- Two roads are close and parallel.

- The vehicle is transported to another destination.

- After the vehicle is rotated on a turntable.

- After vehicle battery disconnection.

READ NEXT:

 Navigation controls

Consists of two menu screens. Icons for the second menu are shown individually. Navigation controls See 104, TOUCH SCREEN OVERVIEW. 1. Move to other Navigation menu. 2. Cancels current route g

 Map split screen

Map split screen 1. TMC (Traffic Message Channel) information. 2. North is up. 3. Small compass display which always indicates North. 4. Next direction display. 5. Current vehicle position.

 Screen modes

Touch the screen mode selection button (12) to view a series of icons, each depicting a different screen mode (as detailed below). Touch the relevant icon to select the desired screen mode. Ful

SEE MORE:

 Steering Gear

Special Tool(s) 205-754A Splitter, Ball Joints 502-012 Alignment Pins, Subframe General Equipment Transmission jack Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTES: Removal steps in this procedure may contain installation details. LHD il

 Audio Amplifier Module (AAM)

CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle. NOTES: If the control module or a component is susp

© 2011-2025 Copyright www.rrevoque.org