Range Rover Evoque manuals

Range Rover Evoque: Headlamps

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Maintenance / Headlamps

Moving the nearside headlamp unit to access bulbs;

1. Remove the two plastic fixings.

1. Remove the two plastic fixings.

2. Pull the tube up to release from the air box.

This will allow more room for manoeuvrability.

3. Remove the four grille fixings.

4. Remove the two retaining bolts.

5. At the rear of the headlamp unit, pull up on the T grip release mechanism and hold while sliding the headlamp unit forward 40mm.

Moving the offside headlamp unit to access bulbs;

1. Remove the four grille fixings.

1. Remove the four grille fixings.

2. Remove the two retaining bolts.

3. Remove the fixing then move the filler tube rearwards. This will allow more room for access to the bulb holders.

4. At the rear of the headlamp unit, pull up on the T grip release mechanism and hold while sliding the headlamp unit forward 40mm.

Removing a headlamp bulb;

1. At the back of the headlamp unit, remove

1. At the back of the headlamp unit, remove the cover. Turn it counter clockwise to release.

2. The back of the bulb unit will now be exposed. Pull down on the electrical connector to release it from the bulb unit.

3. Turn the retaining collar counter clockwise to release the bulb. Remove the bulb unit from the housing.

READ NEXT:

 Direction indicator and side lamp bulbs

Removing the nearside bulbs; To gain more room for accessibility, follow steps 1 and 2 for moving the nearside headlamp unit. 1. At the back of the headlamp unit, remove the indicator bulb hous

 Rear lamp bulbs

1. Remove the two fixings. 2. Direction indicator. 3. Reversing lamp Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb i

 Rear fog lamp

Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

SEE MORE:

 Topping up the washer fluid

The washer reservoir supplies the front and rear screen washer jets and headlamp washer jets. Check and top-up the reservoir level at least every week. Always top-up with screen washer fluid to prevent freezing. Operate the washer switches periodically to check that the nozzles are clear and

 Torque Converter, Valve Block

TORQUE CONVERTER Torque converter housing Lock-up clutch Turbine Impeller Stator Fluid pump Input shaft The torque converter is the coupling element between the engine and the transmission and is located in the transmission housing, on the engine side of the transmission. The driven power

© 2011-2025 Copyright www.rrevoque.org