Range Rover Evoque: Label locations

Warning labels attached to your

Warning labels attached to your vehicle bearing this symbol mean: Do not touch or adjust components until you have read the relevant instructions in the handbook.

Labels showing this symbol indicate

Labels showing this symbol indicate that the ignition system utilises very high voltages. Do not touch any ignition components while the starter switch is turned on.

Additional information labels may also be found at the following locations:

1. Bonnet locking platform - Air conditioning

1. Bonnet locking platform - Air conditioning label.

2. Engine identification information. Stamped into engine mounting flange.

3. Engine information label. Top right side of engine cover.

4. Top of battery - Battery warning symbols.

5. The VIN (Vehicle Identification Number) is stamped on a plate which is visible through the lowest part of the left side of the windscreen.

Note: If you need to communicate with a Dealer/Authorised Repairer, you may be asked to quote the VIN number.

6. End of fascia (passenger side) - Passenger airbag label.

7. Sun visor - Airbag label, vehicle handling label.

8. Base of right-hand B pillar - Tyre pressure label, Airbag warning label - Vehicle Identification Number plate (China).

9. Left-hand B pillar - Airbag warning label, Vehicle Identification Number plate (except China).

10. Inside fuel filler flap - Fuel specification label.

It is important that you are familiar with these subjects to ensure that your vehicle and its features are used safely.

READ NEXT:

 Vehicle build date plate (Australia only)

This is the calendar month and year in which the body and power train assemblies were conjoined and the vehicle was driven from the production line. The vehicle built date is shown on the tyre pr

 Land Rover Range Rover Evoque L538 (2011–2018) Service Manual

Service Manual for first generation (L538) Range Rover Evoque. Land Rover engineers have developed the Range Rover Evoque to provide customers with a polished driving experience that combines dynamic

SEE MORE:

 Powered tailgate operation

1. Press to open the powered tailgate. 2. Press and release to close the powered tailgate. After the tailgate has opened to its set height, it can be manually raised or lowered. If the tailgate fails to open or close correctly, close it manually then press the tailgate release switch again.

 Parking Aid - Component Location

NOTE: Park assist is not available to all markets. COMPONENT LOCATION - SHEET 1 OF 4 - PARKING AID AND PARK ASSIST TCM (transmission control module) CJB (central junction box) Touch Screen Display (TSD) Integrated Audio Module (IAM) ABS (anti-lock brake system) module Audio power amplifier (

© 2011-2025 Copyright www.rrevoque.org